Siemens SIMATIC S7-1500 Automation System User Manual

Technical specifications
15.3 Shipping and storage conditions
S7-1500 Automation System
170 System Manual, 01/2013, A5E03461182-01
15.3 Shipping and storage conditions
Introduction
With respect to transportation and storage conditions, the S7-1500 automation system fulfills
the requirements in accordance with IEC 61131-2. The following statements apply to
modules that are transported and stored in the original packaging.
Shipping and storage conditions for modules
Table 15- 7 Shipping and storage conditions for modules
Type of condition Permissible range
Free fall (in shipping package) ≤ 1 m
Temperature from -40 °C to +70 °C
Barometric pressure 1080 hPa to 660 hPa (corresponds to an altitude
of -1000 m to 3500 m)
Relative humidity 5% to 95%, without condensation
Sinusoidal vibrations in accordance with
IEC 60068-2-6
5 - 9 Hz: 3.5 mm
9 - 500 Hz: 9.8 m/s
2
Shock in accordance with IEC 60068-2-27 250 m/s
2
, 6 ms, 1000 shocks

Siemens SIMATIC S7-1500 Automation System Specifications

General

Series	SIMATIC S7-1500
Programming	TIA Portal (Totally Integrated Automation Portal)
Protection Class	IP20
CPU	Various models available (e.g., CPU 1511-1 PN, CPU 1518-4 PN/DP)
Controller Type	Modular Controller
Programming Languages	LAD, FBD, STL, SCL, GRAPH
Communication Interfaces	PROFINET, PROFIBUS, Ethernet, OPC UA
Digital Inputs	Varies by model and expansion modules
Digital Outputs	Varies by model and expansion modules
Analog Inputs	Varies by model and expansion modules
Analog Outputs	Varies by model and expansion modules
Backplane Bus	High-speed backplane bus for fast communication between modules
Redundancy	Supported with specific models and configurations
Safety	Integrated safety functions available
Scalability	Highly scalable with modular expansion
Operating Temperature	0°C to 60°C