Siemens SIMATIC S7-1500 Automation System User Manual

Module overview
3.7 Load current supply modules
S7-1500 Automation System
26 System Manual, 01/2013, A5E03461182-01
3.7 Load current supply modules
Overview of properties
The table below shows the essential properties of the load current supplies.
Table 3- 8 Load current supply modules
Order no.: 6EP1332-4BA00 6EP1333-4BA00
Short description PM 70W 120/230V AC PM 190W 120/230V AC
Rated input voltage 120/230 VAC, with automatic
switchover
120/230 VAC, with automatic
switchover
Output voltage 24 VDC 24 VDC
Rated output current 3 A 8 A
Power consumption 84 W 213 W
Reference
Further information on the technical specifications of the load current supply modules may
be found in the respective manuals.

Siemens SIMATIC S7-1500 Automation System Specifications

General

Series	SIMATIC S7-1500
Programming	TIA Portal (Totally Integrated Automation Portal)
Protection Class	IP20
CPU	Various models available (e.g., CPU 1511-1 PN, CPU 1518-4 PN/DP)
Controller Type	Modular Controller
Programming Languages	LAD, FBD, STL, SCL, GRAPH
Communication Interfaces	PROFINET, PROFIBUS, Ethernet, OPC UA
Digital Inputs	Varies by model and expansion modules
Digital Outputs	Varies by model and expansion modules
Analog Inputs	Varies by model and expansion modules
Analog Outputs	Varies by model and expansion modules
Backplane Bus	High-speed backplane bus for fast communication between modules
Redundancy	Supported with specific models and configurations
Safety	Integrated safety functions available
Scalability	Highly scalable with modular expansion
Operating Temperature	0°C to 60°C