Siemens SIMATIC S7-1500 Automation System User Manual

S7-1500 Automation System
System Manual, 01/2013, A5E03461182-01
163
Technical specifications
15
15.1 Standards and Approvals
Introduction
Contents of general technical specifications:
● The standards and test values that the modules of the S7-1500 automation system
comply with and fulfill.
● The test criteria according to which the S7-1500 automation system was tested.
Note
Information on the components of the S7-1500 automation system
The current valid markings and approvals are printed on the components of the S7-1500
automation system.
Technical specifications for the modules
The technical specifications of the individual modules can be found in the manuals of
respective modules. In the event of deviations between the statements in this document and
the manuals, the statements in the product manuals take priority.
Reference
The certificates for the markings and approvals can be found on the Internet under
Service&Support (http://www.siemens.com/autom
ation/service&support).

Siemens SIMATIC S7-1500 Automation System Specifications

General

Series	SIMATIC S7-1500
Programming	TIA Portal (Totally Integrated Automation Portal)
Protection Class	IP20
CPU	Various models available (e.g., CPU 1511-1 PN, CPU 1518-4 PN/DP)
Controller Type	Modular Controller
Programming Languages	LAD, FBD, STL, SCL, GRAPH
Communication Interfaces	PROFINET, PROFIBUS, Ethernet, OPC UA
Digital Inputs	Varies by model and expansion modules
Digital Outputs	Varies by model and expansion modules
Analog Inputs	Varies by model and expansion modules
Analog Outputs	Varies by model and expansion modules
Backplane Bus	High-speed backplane bus for fast communication between modules
Redundancy	Supported with specific models and configurations
Safety	Integrated safety functions available
Scalability	Highly scalable with modular expansion
Operating Temperature	0°C to 60°C