Siemens SIMATIC S7-1500 Automation System User Manual

Dimension drawings
A.14 Dimensional drawing of communication module
S7-1500 Automation System
System Manual, 01/2013, A5E03461182-01
191
A.14 Dimensional drawing of communication module
This appendix contains the dimensional drawing of the communication module installed on a
mounting rail and with a shield bracket. Always observe the specified dimensions for
installation in cabinets, control rooms, etc.







Figure A-26 Dimension drawing of communication module, front and side views

Siemens SIMATIC S7-1500 Automation System Specifications

General

Series	SIMATIC S7-1500
Programming	TIA Portal (Totally Integrated Automation Portal)
Protection Class	IP20
CPU	Various models available (e.g., CPU 1511-1 PN, CPU 1518-4 PN/DP)
Controller Type	Modular Controller
Programming Languages	LAD, FBD, STL, SCL, GRAPH
Communication Interfaces	PROFINET, PROFIBUS, Ethernet, OPC UA
Digital Inputs	Varies by model and expansion modules
Digital Outputs	Varies by model and expansion modules
Analog Inputs	Varies by model and expansion modules
Analog Outputs	Varies by model and expansion modules
Backplane Bus	High-speed backplane bus for fast communication between modules
Redundancy	Supported with specific models and configurations
Safety	Integrated safety functions available
Scalability	Highly scalable with modular expansion
Operating Temperature	0°C to 60°C