Siemens SIMATIC S7-1500 Automation System User Manual

Technical specifications
15.1 Standards and Approvals
S7-1500 Automation System
System Manual, 01/2013, A5E03461182-01
167
Use in residential areas
Note
The S7-1500 automation system is intended for use in industrial areas; use in residential
areas may have an impact on radio/TV reception.
If you want to use the S7-1500 automation system in residential areas, you must ensure that
its radio interference emission complies with limit value class B in accordance with
EN 55011.
Suitable measures for achieving RF interference level Class B include, for example:
● Installation of the S7-1500 automation system in grounded switchboards/control cabinets
● Use of noise filters in the supply lines

Siemens SIMATIC S7-1500 Automation System Specifications

General

Series	SIMATIC S7-1500
Programming	TIA Portal (Totally Integrated Automation Portal)
Protection Class	IP20
CPU	Various models available (e.g., CPU 1511-1 PN, CPU 1518-4 PN/DP)
Controller Type	Modular Controller
Programming Languages	LAD, FBD, STL, SCL, GRAPH
Communication Interfaces	PROFINET, PROFIBUS, Ethernet, OPC UA
Digital Inputs	Varies by model and expansion modules
Digital Outputs	Varies by model and expansion modules
Analog Inputs	Varies by model and expansion modules
Analog Outputs	Varies by model and expansion modules
Backplane Bus	High-speed backplane bus for fast communication between modules
Redundancy	Supported with specific models and configurations
Safety	Integrated safety functions available
Scalability	Highly scalable with modular expansion
Operating Temperature	0°C to 60°C