Siemens SIMATIC S7-1500 Automation System User Manual

Glossary
S7-1500 Automation System
204 System Manual, 01/2013, A5E03461182-01
SNMP
SNMP (Simple Network Management Protocol) is the standardized protocol for performing
diagnostics on and assigning parameters to the Ethernet network infrastructure.
In the office setting and in automation engineering, devices from many different vendors
support SNMP on the Ethernet.
SNMP-based applications can be operated on the same network in parallel to applications
with PROFINET.
The scope of supported functions varies depending on the device type. For example a switch
has more functions than a CP 1616.
Switch
PROFIBUS is a linear network. The communication nodes are linked by means of a passive
cable - the bus.
By contrast, Industrial Ethernet consists of point-to-point connections: each communication
node is interconnected directly with precisely one other communication node.
If a communication node is linked to several communication nodes, this communication node
is connected to the port of an active network component - the switch. Additional
communication nodes (including switches) can now be connected to the other ports of the
switch. The connection between a communication node and the switch remains a point-to-
point connection.
A switch thus has the task of regenerating and distributing received signals. The switch
"learns" the Ethernet address(es) of a connected PROFINET device or additional switches
and only forwards those signals that are intended for the connected PROFINET device or
switch.
A switch has a specific number of connections (ports). You connect at most one PROFINET
device or additional switch to each port.
System power supply
Supply of the I/O modules via the backplane bus.
Value status
The value status is a binary additional information of a digital input signal. The value status is
entered simultaneously with the process signal in the process image input and provides
information about the validity of the signal.

Siemens SIMATIC S7-1500 Automation System Specifications

General

Series	SIMATIC S7-1500
Programming	TIA Portal (Totally Integrated Automation Portal)
Protection Class	IP20
CPU	Various models available (e.g., CPU 1511-1 PN, CPU 1518-4 PN/DP)
Controller Type	Modular Controller
Programming Languages	LAD, FBD, STL, SCL, GRAPH
Communication Interfaces	PROFINET, PROFIBUS, Ethernet, OPC UA
Digital Inputs	Varies by model and expansion modules
Digital Outputs	Varies by model and expansion modules
Analog Inputs	Varies by model and expansion modules
Analog Outputs	Varies by model and expansion modules
Backplane Bus	High-speed backplane bus for fast communication between modules
Redundancy	Supported with specific models and configurations
Safety	Integrated safety functions available
Scalability	Highly scalable with modular expansion
Operating Temperature	0°C to 60°C