Siemens SIMOCODE DP

Parameter Data Type Default setting Meaning WinCC Tag
VSTATUS DWORD 16#0 Status-WORD Y
VSTATUS 1 DWORD 16#0 Status WORD1 Y
Input/Output Parameter
I/O Parameter Data Type Default setting Meaning WinCC Tag
AUTON_OP* BOOL FALSE operator input
mode: 1=AUTO;
0=MANUAL
Y
CS_UPD* BOOL FALSE 0->1: update Diag‐
nostic Data
Y
M_SUP_C* BOOL FALSE 1=Suppress cur‐
rent limit messag‐
es
Y
MANON_OP* BOOL FALSE operator input: re‐
mote operator
1=MANUAL
LINKED; 0=MAN‐
UAL
OPERATOR
Y
N_OVL_S* WORD 16#0 set value number
of overload trips
Y
N_STRT_S* DWORD 16#0 set value number
of starts
Y
OFF_OP* BOOL FALSE operator input:
command
1=Close/Stop/O󹪜
Y
ON1_OP* BOOL FALSE operator input:
command
1=Close/Reverse/
Slow
Y
ON2_OP* BOOL FALSE operator input:
command
1=Open/Forward/
Fast/On
Y
OPH_S* WORD 16#0 set value operat‐
ing hours modulo
10
Y
REMON_OP* BOOL TRUE Operator input: Re‐
mote 1=REMOTE;
0=LOCAL SIMO‐
CODE
Y
RESET* BOOL FALSE Operator Input:
1=Reset Monitor‐
ing Error
Y
Parameter
A.2Block Parameter Of SIMO_CHN
SIMOCODE DP PCS 7 Library Migration (Legacy) - V9.1 SP2
96 Programming and Operating Manual, 11/2022, A5E51265657002A/RS-AC/003