Siemens SIPROCESS GA700 - [2.14] Settings > Set message parameters

Functions
6.13 [2.14] Settings > Set message parameters
Operating with the Local User Interface
Operating Manual, 06/2017, A5E31930478-05
187
6.13
[2.14] Settings > Set message parameters
6.13.1
Set message parameters
Procedure
1. Main menu > "2 Settings" > "14. Set message parameters"
This menu includes a filter in addition to the current messages that you can use to
influence the display range of this menu.
Changed filter settings have a direct effect on the menu.
The menu entries have the following structure:
Structure of the navigation lines
Filter inactive/active
1)
Edit
2) 3)
Device
4)
0208
5)
Ext. maint. demand 1:
6)
On
7)
2) 3)
Device
4)
0209
5)
Ext. maint. demand 2:
6)
On
7)
1)
Activation status of filter. Default "Inactive"
2)
Symbol for identification of measuring type
3)
Display that acknowledgment is required. Yes: / No:
4)
Message reference: message refers to the device, a module, or a component. The correspond-
ing designations are displayed.
5)
Message number
6)
Message text
7)
Activation status of message / editing line
2. Set filter: Filtering messages (Page 188).
3. Set individual message parameters: Set individual message parameters (Page 189).