Siemens SIPROCESS GA700 - Measured value status

Alarm, error, and system messages
7.6 Measured value status
Operating with the Local User Interface
276 Operating Manual, 06/2017, A5E31930478-05
7.6
Measured value status
7.6.1
Messages
Overview
The tables below include information that can be displayed for the measured value status by
the device.
Table 7- 9 Display of measured value status "Good"
Measured
value qualifier
Cause
Effect/remedy
141
The measured value is valid, but is below an alarm limit.
-
142 The measured value is valid, but is above an alarm limit. -
143 The measured value is valid, but is not in the permitted alarm
limit range.
-
137 The measured value is valid, but is below a warning limit. -
138
The measured value is valid, but is above a warning limit.
-
139 The measured value is valid, but is within or outside a warning
limit range.
-
188 The measured value is valid, but the function check is active.
For example, measuring mode is active and a user is logged on.
-
168 The measured value is valid, but a maintenance demanded is
signaled.
-
164 The measured value is valid, but a maintenance required is
signaled.
-
128
The measurement is valid (normal measuring mode).
-