Functions
6.7 [2.08] Settings > Calibrations
Operating with the Local User Interface
Operating Manual, 06/2017, A5E31930478-05
121
[2.08.1] Setpoints, tolerances, purging time
6.7.3.1
This menu gives you access to the settings you need for preparation of a
calibration/validation. The menu contains the following submenus:
Table 6- 11 Setpoints, Tolerances, Purging Time
Structure of the navigation lines
1. Setpoints
2. Validation tolerance
Setting the setpoints
Procedure
Note
Measuring ranges
Setpoints can only be set for the activated measuring ranges. If necessary, check the
parameter assignment of the setpoints, for example in →
[1.4] Measuring ranges (Page 88).
To Next Page
Loading...
