Siemens SIPROCESS GA700 User Manual

Functions
6.2 [2.01] Settings >Display/USER FUNC key
Operating with the Local User Interface
98 Operating Manual, 06/2017, A5E31930478-05
6.1.8
[1.6] Save parameter set
6.1.8.1
Parameter sets overview
You can use this menu to save your latest settings in a parameter set. You can use it to
restore any unintentional changes to the parameter assignment. SIPROCESS GA700
devices use two types of parameter sets:
● Factory data: This parameter set is the factory default and is used to restore the original
parameter assignment.
For this reason, factory data can only be loaded.
● User data: This parameter set maps a current, application-specific parameter assignment.
You can save and reload user data at any time.
6.1.8.2
Save parameter set
Procedure
1. "1 Quick Start" > "6. Save parameter set" main menu
Use this function to save the current parameter assignment in the device. The data is
saved as "user data".
2. Start save process: "Save parameter set" parameter field.
– Authorize access with Standard PIN, if necessary.
– Follow the instructions in the displayed window.
6.2
[2.01] Settings >Display/USER FUNC key
6.2.1
Setting the measured-value format
Procedure
The settings for the measured-value format refer to the displays in the main view. The
measured-value format can be set separately for each component.
1. Main menu > "2 Settings" > "01. Display/USER FUNC key" > "1. Measured-value format"
2. Call the parameter display: Press <Enter>.

Siemens SIPROCESS GA700 Specifications

General

Brand	Siemens
Model	SIPROCESS GA700
Category	Measuring Instruments
Language	English