Functions
6.19 [3.05] Maintenance & Diagnostics > Diagnostics values
Operating with the Local User Interface
220 Operating Manual, 06/2017, A5E31930478-05
Table 6- 59 [3.05.3.1] to [3.05.3.4] Electrical parameters
[3.05.03.1] = Analyzer Module 1 and [3.05.03.2] = Analy-
sis Module 2
Reference voltage 2.5
V
X X X X
Supply voltage +5 V X X X -
1)
2)
Half-bridge voltage
- - X -
Current information as effective value, for example, calculated based on redundantly measured
values of the solenoid current 1 and 2.
2)
Setting of the source in AM1 to 7.5 V, in AM2 deviating to 15 V