Siemens SIPROCESS GA700 User Manual

Functions
6.1 [1] Quick Start
Operating with the Local User Interface
84 Operating Manual, 06/2017, A5E31930478-05
3. Set the display language. The default setting is English. "Language" parameter field.
Select your preferred display language.
4. Setting parameters for date and time:
Note
Effects of changes
Changing the tim
e has a direct effect on the sequence of logbook entries and all other
time
-based device services.
Check the logbook entries following changes to this setting. If necessary, reset the
parameters of the logbook filter function.
– Specify display format of the date: "Date format" parameter field.
This parameter field can be edited without PIN input. The following settings are
possible: DD.MM.YYYY, MM/DD/YYYY or YYYY-MM-DD.
– Enter the current date: "Date" parameter field. Authorize access with Standard PIN, if
necessary.
– Enter the current time: "Time" parameter field.
– Enable/disable automatic switching to daylight saving time: "Daylight saving time"
parameter field. Select one of the options:
Setting
Description
Off
Automatic switching is disabled.
Autom. EU Automatic switching to CEST ("Central European Summer Time") on the last
Sunday in March. The CEST ends on the last Sunday in October.
Autom. US Switching to U.S. DST ("Daylight Saving Time") on the second Sunday in
March. DST ends on the first Sunday in November.
Each change results in a logbook entry that has to be acknowledged or confirmed.
– Enter the date of commissioning: "Commissioning date" parameter field.

Siemens SIPROCESS GA700 Specifications

General

Brand	Siemens
Model	SIPROCESS GA700
Category	Measuring Instruments
Language	English