Siemens SIPROTEC 4 7VE61 - Page 196

Transmission rate Min. 4800 Baud; max. 115200 Baud;
Factory Setting: 38400 Baud; Parity: 8E1
Transmission distance 15 m / 50 feet
Service/Modem Interface
Connection
acc. to ordered variant
Isolated interface for data transfer
Operation with DIGSI
RS232/RS485
Connection for flush mounted case Rear panel, mounting location “C”,
9-pin D-subminiature female connector;
Shielded data cable
Connection for surface mounted case In console housing on the bottom side;
9-pin D-subminiature female connector;
Shielded data cable
Test voltage 500 V; 50 Hz
Transmission rate Min. 4800 Baud; max. 115200 Baud
Factory setting 38400 Baud
RS232
Maximum transmission distance 15 m
RS485
Maximum transmission distance 1000 m
System Interface
Connection
acc. to version ordered
potentialfreie Schnittstelle für Datentransfer zu einer Leitstelle
RS232
Connection for flush-mounted housing rear panel, slot “B”,
9-pole D-subminiature female connector
Connection for surface-mounted
housing
at the bottom side of the console housing
9-pole D-subminiature female connector
Test voltage 500 V; 50 Hz
Transmission rate min. 4800 Baud, max. 115200 Baud
Factory setting 38400 Baud
Transmission distance max. 15 m
RS485
Connection for flush-mounted housing rear panel, slot “B”,
9-pole D-subminiature female connector
Connection for surface-mounted
housing
at the bottom side of the console housing
9-pole D-subminiature female connector
Test voltage 500 V; 50 Hz
Transmission rate min. 4800 Baud, max. 115200 Baud
Factory setting 38400 Baud
Transmission distance max. 1 km
Optical fibre cable (FO
FO connector type ST connector
Connection for flush-mounted housing rear panel, slot “B”
Technical Data
4.1 General
196 SIPROTEC 4, 7VE61 and 7VE63, Manual
C53000-G1176-C163-3, Edition 10.2017