To Next Page

To Previous Page

Block library TeleControl ST7

5.2 Structure of the library

TIM 1531 IRC

130 Operating Instructions, 02/2018, C79000-G8976-C468-02

5.2

Structure of the library

Structure of the global library

The opened library contains the following directories:

●

Types

– PLC data types (UDT)

Here you will find the PLC data types (UDTs) used by the libraries.

– System data types (SDT)

Here you will find the system data types used by the libraries.

●

Master copies

You can find the following program blocks here:

–

CPU300/400

Program blocks for the S7-300/400 CPU

–

CPU1500

Program blocks for the S7-1500 CPU

Master copies

The two libraries under "Master copies" for S7-300/400 and S7-1500 are divided into the

following folders:

● Data point typicals

Data point typicals (blocks) for transferring data

● Optional blocks

Optional blocks that you can use when necessary.

● System blocks

Blocks that are used for basic communication.

Depending on the SIMATIC product series used, you can find the following auxiliary

blocks for communication between TIM and CPU in separate folders:

– BCom

Blocks for processing the communication mailbox of the S7-400 and S7-1500

– PCom

Blocks for processing the communication mailbox of an S7-300 with P bus (CPU

without partyline)

– XCom

Blocks for processing the communication mailbox of an S7-300 with X connections

Siemens TIM 1531 IRC User Manual

Questions and Answers: