Siemens TIM 1531 IRC - Diagnostics and upkeep

TIM 1531 IRC
Operating Instructions, 02/2018, C79000-G8976-C468-02
281
Diagnostics and upkeep
7
7.1
Diagnostics options
The following diagnostics options are available.
LEDs of the module
For information on the LED displays, refer to the section LEDs (Page 32).
STEP 7: The "Diagnostics" tab in the Inspector window
If your engineering station is connected to the TIM via Ethernet, here you will receive
information about the selected module:
● Connection status of the engineering station with the TIM
STEP 7: Diagnostics functions in the "Online > Online and diagnostics" menu
Using the online functions, you can read various diagnostics information from the TIM from
an engineering station on which the STEP 7 project is stored and perform maintenance
functions.
You will find additional information on the diagnostics functions of STEP 7 in the STEP 7
information system.
Online access
This is where you establish the online connection to the module.
For the procedure, refer to the section Online functions (Page 283).
Diagnostics
Here, you can obtain the following static information on the selected module:
●
General
General information on the module
●
Diagnostics status
Information on the diagnostics status
●
Ethernet interface[X1/2/3]
Address and statistical information