Siemens TIM 1531 IRC - 6.6 Maintenance

The Web server (WBM)
6.6 Maintenance
TIM 1531 IRC
268 Operating Instructions, 02/2018, C79000-G8976-C468-02
6.5.5
Web server
Web server
●
Disable Web server
Disables the Web server of the TIM. The setting is adopted in the configuration data of
the TIM.
Note
No HTTP/HTTPS connection to the TIM
If you disable the Web server of the TIM, you lose the possibility to ac
cess the TIM via
HTTP/HTTPS.
Access is only possible again after loading the configuration data (with enabled Web
server access).
●
Automatic update
Enable the option if the contents of the Web pages are to be updated automatically.
If the option is disabled, the pages are updated at the interval you configured in STEP 7.
●
Update interval
Here, the update interval configured in STEP 7 is displayed.
If the option is enabled (above) you can enter the desired update interval manually.
●
Save
Applies the update interval entered manually.
6.5.6
DNS configuration
DNS server list
●
List of configured DNS servers
Servers configured in STEP 7
6.6
Maintenance
6.6.1
Firmware
Firmware
This page displays the most important version data of the firmware currently being used.
If a new firmware version is available for the TIM, you will find this on the Internet pages of
Siemens Industry Online Support:
Link: (https://support.industry.siemens.com/cs/ww/en/ps/21764/dl)