Siemens TIM 1531 IRC - Data Points; Logging

The Web server (WBM)
6.10 Logging
TIM 1531 IRC
Operating Instructions, 02/2018, C79000-G8976-C468-02
279
6.9.2
Data points
The tab shows you information on the configures data points of the TIM.
Data points
●
Data point number
●
Name & type
Name and type of the data point
●
Type identifier
Object group/Type of data point
Only relevant for DNP3/IEC
●
Object number
Object number of the ST7 data point
●
Status
Status of the assignment (connection) of the data point to a communication partner
●
Current value
Currently saved value
●
Historical value
Previous value
●
Time stamp
Time stamp of the currently saved value
6.10
Logging
Functions of logging
On this page, you can log the data traffic of the TIM using PCAP functionality for diagnostics
purposes.
If an error occurs or if the TIM behaves in an unwanted manner, the communication behavior
of the TIM can be recorded. The frame traffic of the TIM is recorded for a defined time or for
a configurable number of frames.
The log files are stored as PCAP files on the connected PC and can be evaluated with the
Wireshark program, for example.