Siemens TIM 1531 IRC User Manual

The Web server (WBM)
6.9 Telecontrol
TIM 1531 IRC
278 Operating Instructions, 02/2018, C79000-G8976-C468-02
●
CFB reference
Local ID (decimal) of the S7 connection
●
Connection type
Display of several of the following connection properties:
– PBK connection
Configured S7 connection
– ST7
ST7 connection via classic WAN
– MSC connection
Connection of the MSC protocol for which no S7 connection is required.
– CR connection
Read/write connection to the local CPU that does not require an S7 connection.
– X connection
Unconfigured S7 connection that uses the SFCs "X_SEND" and "X_RCV".
– Permanent / temporary
Permanent or temporary telecontrol connection
– GPRS / no GPRS
GPRS connection or no GPRS connection
– Local/remote
connection to a local or remote partner
●
Connection status
– Connected
– Disconnected
Frame memory status
Display of the frame memory status of the TIM:
●
Normal operation
The send buffer is working normally. The memory space allocation is between 10 and
90%.
●
90% limit reached
When the send buffer is 90% full, the TIM switches to the forced image mode.
See also section Process image, type of transmission, event classes (Page 113).
●
Overflow
Send buffer 100% full

Siemens TIM 1531 IRC Specifications

General

Brand	Siemens
Model	TIM 1531 IRC
Category	Controller
Language	English