Siemens TIM 1531 IRC - Accessories; B.1 Power supply; B.2 SD cards

TIM 1531 IRC
Operating Instructions, 02/2018, C79000-G8976-C468-02
303
Accessories
B
B.1
Power supply
Power supplies for the TIM
Excerpt from the Siemens program for power supplies SITOP and S7-1500:
● SITOP PSU100C
24 V / 0.6 A stabilized power supply, input: AC 120/230 V, output: DC 24 V / 0.6 A
Article number: 6EP1331-5BA00
● SIMATIC PM 1507 24 V / 3 A
Stabilized power supply for SIMATIC S7-1500, input: AC 120/230 V, output:
DC 24 V / 3 A
Article number: 6EP1332-4BA00
● SIMATIC PM 1507 24 V / 8 A
Stabilized power supply for SIMATIC S7-1500, input: AC 120/230 V, output:
DC 24 V / 8 A
Article number: 6EP1333-4BA00
B.2
SD cards
Compatible SD cards
To store configuration data and firmware files you have the option of using an SD card. To
achieve the number of frames named in the section Performance data and configuration
limits (Page 25), the card should have a minimum size of 24 MB.
Note
Temperature range of the SD card
When using an SD card, make sure that this is suitable for the industrial temperature range
from
-40 ... +85 °C.