Siemens TIM 1531 IRC User Manual

Block library TeleControl ST7
5.7 Master copies
TIM 1531 IRC
196 Operating Instructions, 02/2018, C79000-G8976-C468-02
Parameter:
MonitoringTime
Declaration:
INPUT
Data type:
INT
Range of
values:
0
(no limit) / 1 … 32000 (seconds)
Default:
0
Explanation:
Maximum time for a complete response to a single request
Each time a single request starts (see SingleRequest parameter), the time
specified here is started in "SingleRequest".
If a value higher th
an 0 is entered and the time for the response sequence is
exceeded, an error is indicated via the "DataStatus" output byte (status bits
"SequenceState"). Apart from this an entry is written to the diagnostics buffer
(event ID B13CTD7_Diagnostics).
Each time a single request starts, "MonitoringTime" is reactivated.
Parameter:
DataOutput
Declaration:
INTPUT
Data type:
ANY
Range of
values:
See address range
Default:
P#P 0.0 VOID 0
(null pointer)
Address
range:
P#DBxx.DBX yy.0 DWORD zz
•
xx: Data block number 1...32767
•
yy: Byte number
•
zz: Number of double words 1...256 starting at byte number yy
Example:
P#DB20.DBX 100.0 DWORD 200
Remember the periods and spaces when entering the pointer!
Note that the default value (null pointer) is not permitted. A point
er with a real
address must be specified.

Siemens TIM 1531 IRC Specifications

General

Brand	Siemens
Model	TIM 1531 IRC
Category	Controller
Language	English