Siemens TIM 1531 IRC User Manual

Block library TeleControl ST7
5.7 Master copies
TIM 1531 IRC
Operating Instructions, 02/2018, C79000-G8976-C468-02
211
Default:
FALSE
Explanation:
Continuous local parameter acquisition.
With this parameter, you can decide whether the values in the "LocalParam
e-
te
rInput" input area should be continuously read in and checked for changes.
The change is checked by comparing the current values at the "Para
m-
eterOutput" output.
Changes in the input area are copied immediately to the output area and
transferred to the par
tner object. Only changed values are sent. If there is
more than one change, the block sends the data area in which all changed
parameter values are located.
The "ContinuousEnterFunct" = TRUE setting only takes effect when the fo
l-
lo
wing conditions are met:
•
An input area is defined by "LocalParameterInput" and this is not identical
to the output area set for "ParameterOutput".
and
•
there is a 1 signal at the "Local" input (= TRUE).
With the setting "ContinuousEnterFunct" = TRUE, when the signal 1 is detec
t-
ed
at the "Local" input, the values pending at "LocalparameterInput" are
adopted immediately and output at the "ParameterOutput" output. The cond
i-
tion is that the local input values differ from the currently output values at this
time.
This method of acquisit
ion of local values is suitable when the values are en-
tered in the "LocalParameterInput" area by software.
If you do not require the parameter, simply leave it open.
Parameter:
LocalParameterInput
Declaration:
INPUT
Data type:
ANY
Range of
values:
Se
e address range
Default:
P#P 0.0 VOID 0
(null pointer)

Siemens TIM 1531 IRC Specifications

General

Brand	Siemens
Model	TIM 1531 IRC
Category	Controller
Language	English