Siemens TIM 1531 IRC - Page 231

Block library TeleControl ST7
5.7 Master copies
TIM 1531 IRC
Operating Instructions, 02/2018, C79000-G8976-C468-02
231
Bit
.7
Status of the dial-up connection
0
0 = No dial-up connection check in background
1 1 = Dial-up connection check in background is activated
Bit
.8
Status of continuous polling (on dedicated line)
0
0 = No continuous polling
1 1 = Continuous polling activated
Bit
.9
Status of the WAN connection resources
*)
0
0 = Sufficient resources on partner
1
1 = Insufficient resources on partner
Bit
.10
Time status
0
0 = Date/time not available / not OK on partner
1
1 = Date/time OK on partner
Bit
.11
Time-of-day synchronization
0 0 = The partner CPU received a plausible time during the last syn-
chronization or no synchronization time has been received since
startup.
1 1 = The partner CPU has received an implausible synchronization
time; the last valid time will continue to be used.
(Display only with TimeMask > V1.6)
Note
In-out parameters
The following parameters are in/out parameters (declaration IN_OUT):
•
GeneralRequest
•
PermanentCall_On
•
PermanentCall_Off
It is difficu
lt to specify local bit memory with this parameter type and this should not be used.