Siemens TIM 1531 IRC - Page 238

Block library TeleControl ST7
5.7 Master copies
TIM 1531 IRC
238 Operating Instructions, 02/2018, C79000-G8976-C468-02
Coding options - TIM 1531 IRC
Same coding of the configured interface for the main and the substitute path means that
there is no path redundancy (only 1 interface configured). The path status is output via the
bits of the main path (1st path).
Table 5- 11 Coding options for the output byte "PathStatus"
Configured interface
Path status
Coding for substitute
path
Coding for main path
Substitute path (2nd
path)
Main path (1st path)
0 0 0 0 (Coding for IE1) Irrelevant (not redun-
dant)
Status IE1
0 0
0 1 (Coding for IE2)
Status IE1
Status IE2
0 0
1 0 (Coding for IE3)
Status IE1
Status IE3
0 0
1 1 (Coding for WAN1)
Status IE1
Status WAN1
0 1
0 0
Status IE2
Status IE1
0 1 0 1 Irrelevant (not redun-
dant)
Status IE2
0 1
1 0
Status IE2
Status IE3
0 1
1 1
Status IE2
Status WAN1
1 0
0 0
Status IE3
Status IE1
1 0
0 1
Status IE3
Status IE2
1 0 1 0 Irrelevant (not redun-
dant)
Status IE3
1 0
1 1
Status IE3
Status WAN1
1 1
0 0
Status WAN1
Status IE1
1 1
0 1
Status WAN1
Status IE2
1 1
1 0
Status WAN1
Status IE3
1 1 1 1 Irrelevant (not redun-
dant)
Status WAN1
Coding options - TIM 4R-IE
Same coding of the configured interface for the main and the substitute path means that
there is no path redundancy (only 1 interface configured). The path status is output via the
bits of the main path (1st path).
Table 5- 12 Coding options for the output byte "PathStatus"
Configured interface
Path status
No. for substitute path
No. for main path
Substitute path (2nd
path)
Main path (1st path)
0 0 0 0 (Coding for IE1) Irrelevant (not redun-
dant)
Status IE1
0 0
0 1 (Coding for IE2)
Status IE1
Status IE2
0 0
1 0 (Coding for WAN1)
Status IE1
Status WAN1
0 0
1 1 (Coding for WAN2)
Status IE1
Status WAN2
0 1
0 0
Status IE2
Status IE1