Siemens TIM 1531 IRC User Manual

Approvals
TIM 1531 IRC
298 Operating Instructions, 02/2018, C79000-G8976-C468-02
You will find the EC Declaration of Conformity on the Internet at the following address:
Link: (https://support.industry.siemens.com/cs/ww/en/ps/21764/cert)
> Ceificate type: "EC declaration of conformity"
IECEx
The product meets the requirements of explosion protection according to IECEx.
IECEx classification: Ex nA IIC T4 Gc
IECEx certificate: IECEx DEK 14.0025X
The product meets the requirements of the following standards:
● IEC 60079-0
Hazardous areas - Part 0: Equipment - General requirements
● EN 60079-15
Explosive atmospheres - Part 15: Equipment protection by type of protection 'n'
You can see the current versions of the standards in the IECEx certificate that you will find
on the Internet at the following address:
Link: (https://support.industry.siemens.com/cs/ww/en/ps/21764/cert)
Note the conditions for the safe deployment of the product according to the section Notes on
use in hazardous areas according to ATEX / IECEx (Page 41).
You should also note the information in the document "Use of subassemblies/modules in a
Zone 2 Hazardous Area" that you will find on the Internet at the following address:
Link: (https://support.industry.siemens.com/cs/ww/en/view/78381013)
ATEX
The product meets the requirements of the EC directive:2014/34/EC "Equipment and
Protective Devices for Use in Potentially Explosive Atmospheres".
ATEX approval: II 3 G Ex nA IIC T4 Gc
Type Examination Certificate: KEMA 07ATEX0145 X
Applied standards:
● EN 60079-0
Hazardous areas - Part 0: Equipment - General requirements
● EN 60079-15
Explosive atmospheres - Part 15: Equipment protection by type of protection 'n'
The current versions of the standards can be seen in the EC Declaration of Conformity, see
above.
The conditions must be met for the safe deployment of the product according to the section
Notes on use in hazardous areas according to ATEX / IECEx (Page 41).
You should also note the information in the document "Use of subassemblies/modules in a
Zone 2 Hazardous Area" that you will find on the Internet at the following address:
Link: (https://support.industry.siemens.com/cs/ww/en/view/78381013)

Siemens TIM 1531 IRC Specifications

General

Brand	Siemens
Model	TIM 1531 IRC
Category	Controller
Language	English