Preface
TIM 1531 IRC
4 Operating Instructions, 02/2018, C79000-G8976-C468-02
This manual describes the properties of this device and shows application examples.
The manual supports you when installing, connecting up and commissioning the device.
The required configuration steps for the device are described.
You will also find instructions for operation and information about the diagnostics options of
the device.
● New firmware version with the following new functions:
– Use of the TD7 variant "TD7onCPU" via program blocks on the CPU
– Options for expanding SINAUT projects configured in STEP 7 V5 to STEP 7
Professional
– PG routing
● Editorial revision
Edition 05/2017
To install, commission and operate the device, you require experience in the following areas:
● Setting up industrial networks with security functions
● Data transfer via WAN networks
● SIMATIC STEP 7 Professional
This manual often uses the following abbreviations/acronyms:
●
The names are used instead of the full product name "TIM 1531 IRC" of the device.
●
Short form for the telecontrol protocol "SINAUT ST7"
●
"WBM" is the acronym for the "Web Based Management" of the pages of the TIM Web
server for configuration and diagnostics data.
In this manual there are often cross references to other sections.
To Next Page
Loading...
Need help?
General
