Siemens TIM 1531 IRC - Page 70

Configuration
4.9 Ethernet interface
TIM 1531 IRC
70 Operating Instructions, 02/2018, C79000-G8976-C468-02
MSCsec protocol
●
Activate security protocol MSCsec
If the option is enabled, the secure version of the MSC protocol "MSCsec" is used.
Can only be configured if the setting of the Network node type of the interface is "Station"
or "Node station".
●
Key exchange interval
Time (h) after which the secret key is renewed between the MSC station and master
station.
Default setting: 0. Permitted range: 0...255
APN settings
Here you configure the access point (APN) from the mobile wireless network to the Internet.
●
APN - country
Country of the network provider that provides the APN.
Select the country and one of the preset network providers or select the entry "User-
defined" and configure the APN manually.
●
APN - provider
name o the network provider that provides the APN. Select the name from the drop-down
list.
●
APN
Access Point Name
Name of the access point. You obtain this information from your network provider.
●
APN user name
Entry of the user name for Internet access via the mobile wireless network. You obtain
this information from your network provider.
●
APN password
Entry of the password for Internet access via the mobile wireless network. You obtain this
information from your network provider.