To Next Page

To Previous Page

CA4

2/50

/52 Radar operation Chapter 8

121

8.2.9 Demo mode

For the purpose of a demonstration, the radar function has a demo

mode, which can present a simulated radar picture without having a

radar scanner connected.

To activate the demo mode:

Call up the menu bar, and…

6,3

load Radar setup display

ADJ

Open for adjustment

- a warning will pop up that you are about to change settings for the

radar, press [

MENU] to abandon, or [ENT] to continue.

Use the cursor key to go to ‘Scanner type’,andselect‘Demo’ with the

+/- keys

ENT

Accept change & exit Radar setup

Press for 2 seconds to start a count-down of 30 seconds

Press for 2 seconds again to activate the demo mode

Use the [ZOOM] keys to adjust the range and presentation.

The legend Demo will stay in the top left of the screen to indicate the

demo mode is active.

Bring the Demo mode in Standby:

Press for 2 seconds to start a count-down of 9 seconds and press again

for 2 seconds before the count-down reaches 0

- the radar function will now enter a Standby mode.

This way you can easily return to the simulated radar picture by

pressing [TX] for 2 seconds.

Turn off the Demo mode and return to normal operation:

Press for 2 seconds to start a count-down of 9 seconds to Power off

Call up the menu bar, and…

Simrad CA42 User Manual

Questions and Answers: