CA42/50/52 Waypoint/route menus Chapter 5
57
5.3 Route calculation
To stay well informed during navigation, the Route calculation display
will provide information on how long it takes to go from one point to
another, total distance, arrival time, etc.
MENU
Call up the menu bar, and…
3,3
load route calculation display
Route calculation:
Route: RTE 37
Course line: ON
XTE: ON
Routepoint A: 0001
Routepoint B: 0003
ETA speed: 10.0kn AUTO
Total distance from A to B: 110.5nm
Time to go from A to B: 2h35m
Arrival time: 11:41
Date: 12-02-2001
+/-
Toggle between available routes in the memory
Go to Routepoint A, and
0-9
Select the first route point (A) from where you wish to start the
calculation in the route, and then select the second point (B)
Present speed is automatically used for calculating the arrival time, but
if required, an alternative speed can be inserted:
ENT
Open for change
0-9
and insert new speed value
+/-
Toggle between AUTO and MANUAL
ENT
Confirm entry
To Next Page
Loading...
Need help?
General
