CA42/50/52 Miscellaneous menu Chapter 9
126
9.4 Data transfer via DataCard or disc
Data transfer to and from external memory can be performed via
DataCard,orwithaSimradTL50TurboLoader:viaanordinary
1.44Mb disc.
DataCards and TL50 Turbo Loader are optional equipment available
from you local Simrad dealer.
How to perform data transfers via TL50 Turbo Loader (inclusive data
from Shipmate RS2500 Trackplotter) is described in the TL50 manual.
Use the Simrad DataCard or TL50 Turbo Loader to make backup files
of all the user data you have created plus the current setups in the
internal memory of the unit. Do it whenever you have added important
data, or when you wish to transfer routes and waypoints, etc. to another
compatible unit.
The storage capacity of the DataCard/TL50 disc is divided into two
databanks of each 450 Kb, meaning that the entire internal memory can
be stored in one databank.
• External memory with data transfer via DataCard:
MENU
Call up the menu bar, and…
7,4
load the ‘Data transfer’ window
Data transfer
_1_ DataCard upper drawer
_3_ DataCard lower drawer
_7_ NMEA connection
- section 9.5
_MENU_ Exit
Select the drawer where you have inserted the DataCard i.e. [1] for the
upper drawer, and [3] for the lower drawer.
You now have a choice of:
[1] DataCard status
[3] Save on DataCard
[9] Load from DataCard
To Next Page
Loading...
Need help?
General
