Simrad CA42 User Manual

CA42/50/52 Waypoint/route menus Chapter 5
60
5.5 Start / stop track
The track function will provide a track trailing the movement of your
ship. With a Simrad TL50 Turbo Loader + ARPA radar connected, you
will also be able to track ARPA targets on the CAXX chart display -
refer to the TL50 manual for further details.
To start track function from own ship:
MENU
Call up the menu bar, and…
3,5
load Start track pop-up window
Start track:
Name: TRACK 1
Display track: ON
Update: DISTANCE
Interval: 0.100nm
Trackpoints: 0
Type:
As default
from the
factory:
The first
track is
stored as
TRACK1,
the next as
TRACK2,
etc.
MENU
Exit Start
ENT
If you wish to change the default values:
Move cursor to where you wish to make a change
+/-
Toggle between available values, or…
0-9
key in new values
ENT
Start track by pressing
[ENT]
Name of track can be altered (max. 25 characters).
Display track can be set ON and OFF, where OFF will make it
invisible on the screen. Turn ON to put it back on the screen.

Simrad CA42 Specifications

General

Brand	Simrad
Model	CA42
Category	GPS
Language	English