CA42/50/52 NAV menus & navigation examples Chapter 6
76
6.5.2 Waypoint navigation
There are two ways of activating Waypoint navigation:
From the chart or from the menu.
From the chart:
CHART
Shortcut to chart 1 display
Press the cursor key to activate the cursor, then move the chart cursor
to your destination waypoint (orselectfromWPlist-seebelow)
GOTO
Select NAV mode, and…
2
Select Waypoint from WPlist (if chart cursor is placed on a WP, this
WP will be highlighted in the WPlist)
This will activate the pop-up window ‘Navigate to WP’ - now follow
the procedures from the ) a few lines down.
From the menu:
MENU
Call up the menu bar, and…
4,2
select Waypoint navigation
) This will activate the pop-up window “Navigate to WP” from where
you can choose which waypoint you wish to sail to:
Use the cursor to scroll up/down in the waypoint list, or place cursor
on the WP number, and…
+/-
Scroll up/down with +/- keys, or…
0-9
Key in the number of the waypoint you wish to sail to
ENT
Start navigation
A course line will now be drawn from ship’s position to destination
waypoint.
To Next Page
Loading...
Need help?
General
