CA42/50/52 Setup menu Chapter 10
133
10. Setup menu
_8_
SETUP
_1_ Speed alarm, units & language
- section 10.1
_2_ NMEA interface
- section 10.2
_3_ Alarm/log output
- section 10.3
_4_ Decca lanes
- section 10.4
_5_ Loran C
- section 10.5
_6_ Display color
- section 10.6
_7_ Factory settings
- section 10.7
10.1 Speed alarm, units & language
MENU
Call up the menu bar, and…
8,1
load Speed alarm, units & language display
Setup for speed:
LOG speed sensor: ON
LOG speed calibration: 019000 PULSES/nm
Speed alarm maximum: 000.0kn OFF
Speed alarm minimum: 000.0kn OFF
Setup for units:
Depth/altitude in: METERS
Distance in: NAUTICAL MILES
Speed in: KNOTS
Temperature in: DEGREE CELCIUS
To select
new values
for this setup
display – see
next page.
Software version: CA42 MKII 4.30
TL50 version: Not connected
GPS receiver type: N12000
PAGE rotation interval: 05 sec.
Display text in: English GB
MENU
Exit Accept
ENT
go to the function you wish to change
0-9
Key in new values, or…
+/-
toggle between available values