CA42/50/52 Fundamentals & initial start-up Chapter 2
16
The echosounder function has a demo program, which can be activated
in the Echosounder setup display, refer to section 7.8.
) When a transducer has been installed and selected, and the Echo-
sounder function is set up and ready to perform, please make sure that
the demo mode is switched OFF.
Select display language:
MENU
Call up the menu bar, and…
8,1
press
[8]
and
[1]
to call up the language display
Go to the bottom line in the display
+/-
Select language
ENT
Confirm entry
2.8 Turn power off
PWR
Call up INFO window, and…
PWR
Press and hold until screen turns black
The CAXX is now turned off. All data and setups are saved and stored
in the internal memory and, of course, will be available next time the
unit is turned on.
To Next Page
Loading...
Need help?
General
