CA42/50/52 Miscellaneous menu Chapter 9
131
ENT
Stop and save
- will stop collecting data (if not already finished) and start saving the
collected data.
) Waypoints/routes transmitted to the CA42/50/52 are added to the
WP/route list. However, if two waypoint/route names are identical, the
latest transferred one will not be saved, even though position(s) may be
different. Routepoints will not be included in the WP list.
Saving the collected data can take anywhere from less than a second
and up to a few minutes, depending on the amount of data. If it takes
too long and you need the CA42/50/52 in a hurry, then press the
[MENU]keytoStopsavinganymoredata– what has been saved until
this point will stay in the memory, the rest will be lost.
MENU
Stop saving
Under normal circumstances we assume the saving procedure is
allowedtofinishandwillindicate“Saving completed” in the info
window. You are now ready to:
MENU
Exit function and return to normal NMEA communication
NB! PC-based planning systems differ in operation and performance
beyond the control of Simrad.
To Next Page
Loading...
Need help?
General
