CA42/50/52 Glossary of terms Appendix A
153
Navigation simulator - the chartplotter function features a built-in navigation
simulator which can be used for demonstration purpose or for practicing ‘live’
navigation in ‘off season’.
Navigation to cursor or waypoint, in route or in track is started as described in
chapter 6. The navigation simulator is started via the NMEA interface setup:
Press [MENU],[8],[2]; go to ‘OFF’ next to ‘External position, course, speed:’
and press the [+] zoom key twice to toggle to: Dead reck.; move cursor to the
right and enter a speed value of e.g. 10 knots; press [ENT] twice.
The ship symbol will now ‘sail’ to the point of destination directly or via the
route you have selected and you can see how the alarms and automatic waypoint
shift all work, as if you were sailing yourself. You can also simulate making a
track trailing the ship or plotting eventmarks, etc. as the ship is ‘sailing’.
NMEA – National Marine Electronics Association. The NMEA is an
organization of manufacturers of marine electronics equipment. They have
adopted the NMEA0183 as a standard for communications between various types
of marine electronic equipment.
Port side – left (red).
Release cursors – see “Lock cursors”.
Restart to approaching point – will automatic recalculate the navigation data
from current position to approaching point.
Rhumbline – is the straight line to a waypoint on a chart.
Route name – each route can be given a name for easy identification.
SDGPS - Satellite Differential Global Positioning System - will provide position
corrections from received satellite signals.
Speed – Speed Over Ground, measured in knots, kilometers, and miles.
Starboard side – right (green).
TFT – Thin-Film Transistor (Active matrix).
Trackpoint advance - will automatically shift to the next trackpoint in the track
and provide new steering details (Track navigation).
To Next Page
Loading...
Need help?
General
