MOB ‘MAN OVERBOARD’ function
MOB
In case someone falls overboard, press the [MOB] key and hold for two
seconds, or activate an external MOB switch – hold for five seconds.
CLR
Press
[CLR]
to confirm and reset the alarm if activated by mistake.
ENT
Pressing [ENT] will provide all relevant data for an efficient rescue
operation.
Display 1
Display 3
Display 2
Screen layout default after activating
MOB.
Display 1: The MOB display will provide the position where the man
fell overboard, together with present course (C), bearing (B), and
distance (DIST) to the MOB position.
Elapsed time - first in seconds and then in minutes. If “*” is shown
instead of number of minutes, means that the elapsed time has
exceeded 9999 minutes.
Display 2: Data display will provide information of: Date, time and
position of MOB incident.
Display 3: The CHART display will provide a graphical impression of
the MOB position – a man waving his arms in relation to the ship.
To turn MOB navigation off (two ways):
Either press [GOTO], [3] or... press [MENU], [4], [2].
To recall last MOB position, see section 9.2.
To Next Page
Loading...
Need help?
General
