SMART Board GX V3 Series - Viewing a Connected Computer or Other Devices Input

Chapter 4 Connecting computers and other devices
docs.smarttech.com/kb/171904 101
l
VGA
Connector Standard Connection type Cable
VGA VGA Video VGA
Audio In Stereo 3.5 mm Audio Stereo 3.5 mm
Touch USB 2.0 Type-B Touch High Speed (480 Mbps) USB2.0
Viewing a connected computer or other device’s input
1. Connect a device to the display’s HDMI 1, HDMI 2, HDMI 3, USB Type-C 1, USB Type-C 2, Display
Port, or VGA connectors.
Note
To enable touch control of the device, connect a USB cable to the associated USB connector.
Devices connected to the USB Type-C connector don’t require an additional USB connection to
enable touch.