Chapter 1 Welcome
docs.smarttech.com/kb/171904 12
l
If you want to use the 75" and 86" models (GX175-V3 and GX186-V3) with one of SMART’s electric
height-adjustable stands, you must first attach a SMART wall mount (model WM-SBID-200, part
#1031766, docs.smarttech.com/kb/171405) to the display before mounting the display to the
stand. (This applies to the FSE-400, FSE-410, and FSE-420 models of mobile stand and the WSE-
400 and WSE-410 models of wall stand).
l
Note for users in Australia and New Zealand: SMART does not provide stands for use in Australia
or New Zealand, nor can we provide recommendations for stands from other vendors.
USB extenders
As noted in the display’s specifications, the USB connection between the display and computer should be
no longer than 16'(5m). If you need to connect a computer that is more than 16' (5 m) from the display,
use the following USB extender:
Extender Specifications
USB-XT docs.smarttech.com/kb/
119318
See also USB cable extenders
More information
SMART provides a variety of other documents for this display in the Support section of the SMART
website (smarttech.com/support). Scan the QR code on this guide’s cover for links to SMART Board GX
(V3) series interactive display documents and other support resources.
To Next Page
Loading...
Need help?
General
