Chapter 1 Welcome
docs.smarttech.com/kb/171904 8
Models Size (diagonal)
GX175-V3 75"
GX186-V3 86"
Mounting hardware
You can use VESA compliant wall mounts, such as SMART’s WM-SBID-200 wall mount (not included), to
mount the display on a wall.
You can also mount the display on a mobile stand (see
Accessories
on page11).
Front control panel
The front control panel provides buttons for turning the display on and off, controlling the volume,
freezing the screen, and displaying the Home screen.
See
Using the front control panel
on page14
Remote control and infrared sensor
The display’s infrared sensor is located in the control panel in the bottom-right corner of the display’s
frame.
You can use the remote control to turn the display on and off, adjust display settings, and so on.
See
Using the remote control
on page15
Ambient light sensor
The ambient light sensor is located in the bottom-right corner of the display’s frame. The sensor detects
the brightness of the room and adjusts the screen’s brightness accordingly.
To enable or disable this feature, go to Input Advanced settings Screen AutoLight.
See the
SMART Board GX (V3) series interactive displays installation and maintenance guide
(docs.smarttech.com/kb/171903).
Power status
See
Using the front control panel
on page14
To Next Page
Loading...
Need help?
General
