26
Scanner Operations Basic Operation and Navigation
Properties
The Properties icon on the Scanner Toolbar is used to configure certain characteristics of the
parameter graph display. Selecting opens a Properties dialog box that allows you to adjust colors,
settings, and sweep (Figure 4-5).
Figure 4-5 Sample properties dialog box
Selecting either color option, Edit Plot Color or Edit Background Color, opens a standard color
selection dialog box. Select a color, then select OK to close the dialog box.
The Show Grid icon is used to switch a background grid pattern on the data graphs on and off:
• To switch the grid on; select to highlight Show Grid, then select Accept.
• To switch the grid off; select Show Grid twice so it is not highlighted, then select Accept.
The Samples After Trigger setting determines how many data samples are recorded following a
triggering event. The highlighted samples icon indicates the number of frames that are included in
the recording after a triggering event.
The sweep options let you choose the amount of data that displays across the graph. Values are
in sample points, or frames of data. A frame of data equals one complete transmission of the serial
data by the electronic control module.
To Next Page
Loading...
