Sonic KSE-310 - Page 100

II-90
Table 2-10 Names of settings and their assigned functions
Fig. 2-103 The procedure to set the user key
No
Name of Setting
Function
Default Setting
1
H CURSOR 1
Enables or disables H CURSOR 1.
-
2
H CURSOR 2
Enables or disables H CURSOR 2.
-
3
V FIXED CURSOR
Enables or disables V FIXED CURSOR.
-
4
V FREE CURSOR
Enables or disables V FREE CURSOR.
-
5
SWITCH SYNC
Sets either internal or external synchronization
-
6
REPLAY SETTING
Displays the screen to replay the settings.
-
7
MEMORY SETTING
Displays the screen to store the settings.
-
8
REC PICTURE
Captures the screen.
F1
9
REPLAY PICTURE
Displays the screen to replay the settings.
F3
10
RECORD
CONSECUTIVE
PICTURE
Turns ON or OFF recording of consecutive
pictures.
F2
11
RECORDER
SETTING
Displays the screen to set recording.
-
12
RECORD DATA
Starts or stops recording
-
13
UNASSIGNED
Assigns no setting
F4
Check the radio button of
any one of 13 functions.
4
The number shown here changes from 1 to 4 depending on what is
selected from F1 to F4 (this figure shows F4)
The functions you have set are displayed, and the background color turns
green. Press the OK button to complete the setting procedure.
Press the OK button.
5
If these functions have already been selected for F1 -
F3, they are disabled and cannot be selected.
4
5