Sonic KSE-310 - Net Depth Input

Ⅲ-IV-11
4-4-2 Net depth input
(1) Connection method
For net depth input, keying is output from the J30 connector pin number
AA/BB, and the net depth signal is input to J30 connector pin number u/y, v/y,
w/y and x/y.
Table 4-9 Connection of J30 Connector net depth input and output signals
Pin No.
Signal Name
Signal Level
AA
NET_Keying_out
Open collector output or
TTL level output
BB
GND
GND
u
NET_35kHz_in
5V - 120V input
v
NET_45kHz_in
5V - 120V input
w
NET_55kHz_in
5V - 120V input
x
NET_65kHz_in
5V - 120V input
y
GND
GND
(2) The standard and timing
The net finder keying input is used for inputting and outputting the net depth
for net finders other than Net Finder KNF-100 of SONIC CORPORATION.
Fig. 4-10 Net depth input and output standard
(3) Net finder keying output cycle setting
Keying output
5ms
Select from 0.5s, 1.0s, 1.5s and 2.0s.
Level: HIGH (5.0 - 4.5V)
LOW (0.5 - 0.0V)
Open collector: Max.50mA
Net depth
1ms or more
Keying input
HIGH (5 - 120V)
LOW (0 - 2V)