Sonic KSE-310 - Cursor Control Window and Depth Window for the Calibration

II-79
2-16-8 Cursor control window and depth window
for the calibration
When the calibration starts, the cursor control window (Fig. 2-86) and the cursor
depth window (Fig. 2-87) appear for the horizontal cursors 1 and 2 to specify the
depth range of the calibration ball.
Fig. 2-86 Cursor control window
Fig. 2-87 Cursor depth window
When one of the buttons in the cursor control window is pressed, the
background color of the button turns orange. (Figure 2-88 shows the window
when the green line button is pressed. Figure 2-89 shows the window when the
gray line button is pressed.)
Fig. 2-88 When the green line button is pressed. Fig. 2-89 When the gray line button is
pressed.
*The two buttons cannot be selected at the same time.