Sonic KSE-310 - Calibration

II-69
2-16 Calibration
A calibration mode is available as the calibration function of this system.
Details of the operation in the calibration mode are described in Section 6. This
section describes how to operate on the window.
The CALIBRATION window can be set according to the procedure shown in Fig.
2-76.
Fig. 2-76 CALIBRATION window opening procedure
The CALIBRATION window opens.
Press the L key on
CALIBRATION.
Select the menu button to display the menu list.
Press the L key on the menu
Select CALIBRATION from the menu list in order to display the
CALIBRATION window .