II-4
2-4 Adjust Gain
Fig. 2-6 GAIN on the operation panel
The gain can be changed when there is a pointer in the ES display area. The
gain key shown in Fig. 2-6 is used for changing the gain.
To change the gain, press the △ key to increase the gain (max. 10.0), and
press the ▽ key to reduce the gain (Fig. 2-7)
Fig. 2-7 ES images changed by the gain change.
The gain can be changed in increments of 0.1, so that you can change the
gain as you need.
To Next Page
Loading...