Sonic KSE-310 - Assignment

II-119
2-18-4 ES ASSIGNMENT
ES ASSIGNMENT is for setting the SR number and frequency connected to
the ES number to be displayed.
ES ASSIGNMENT can be set according to the procedure shown in Fig. 2-
110.
Press the L key on the menu button.
Select the MENU button to display the menu list.
Select SYSTEM from the menu list, and select ES ASSIGNMENT.
Press the L key on the
ES ASSIGNMENT.
2
1
The ES ASSIGNMENT screen appears. Select both the SR number and
frequency for the ES number to be displayed.
* The ES number will be active depending on the transducer (frequency)
connected.
3
Fig.2-110 ES ASSIGNMENT