Sonic KSE-310 - Page 66

II-56
2-14-3-2 Interference by synchronization (audio equipment
transmitting in the same intervals)
For rejection of the interference by synchronization, follow the
procedure shown in Fig. 2-61.
Fig. 2-61 Procedure to use interference rejection by synchronization
Select the MENU button to display the menu list.
Press the L key on the MENU button.
1
1
Select the ES SETTING from the menu list, and select the ES COMMON
SETTING.
Press the L key on
the ES COMMON
SETTING.
3
Change the INTERNAL TX CYCLE SETTING of 2.0 (from 2.0 to 5.0 in
steps of 0.1)
Use the up and
down arrow key for
INTERNAL TX
CYCLE SETTING.
3
2
2