Making your own titles
To change a title you have stored
In step 3, select CUSTOM1 SET or CUSTOM2 SET, depending on which title you want
to change, then press the SEE/PUSH EXEC dial.
Turn the SEE/PUSH EXEC dial to select [÷], then press the dial to delete the title. The
last character is erased. Enter the new title as desired.
If you take three minutes or longer to enter characters in the standby mode while
a cassette is in your camcorder
The power automatically goes off'. The characters you have entered remain stored in
memory. Set the POWER switch to OFF (CHG) once, and turn it to CAMERA again,
then proceed from step 1.
We recommend setting the POWER switch to VCR or removing the cassette so that
your camcorder does not automatically turn offwhile you are entering title characters.
[f you select [-)P2]
The menu for selecting alphabet and Russian characters appear. Select tOP1} to return
to the previous screen.
To erase a character
Select [÷]. The last character is erased.
To enter a space
Select [Z& ?!}, then select the blank part.
{3*
<
8
o_
g
o
_o
©
13
o
61
To Next Page
Loading...
