Sony Digital 8 DCR-TRV340 - Page 80

Dubbing only desired scenes - Digital program editing (on tapes)
When you connect using i.LINK cable (DV connecting cable) (optional), follow the
procedure below.
(1) Set the POWER switch to VCR on your camcorder,
(2) Turn the power of the connected VCR on, then set tile input selector to DV
input. When you connect a digital video camera recorder, set its power switch
to VCR/VTR.
(3) Press MENU m display tile menu settings.
(4) Turn the SEL/PUSH EXEC dial to select _, then press tile dial.
(5) For DCR-TRV240:
Turn the SEL/PUSH EXEC dial to select VIDEO EDIT, then press tile dial.
For DCR-TRV340/TRV740/TRV840:
Turn the SEL/PUSH EXEC dial to select TAPE in VIDEO EDIT, then press tile
dial.
(6) Turn the SEL/PUSH EXEC dial to select EDIT SET, then press tile dial.
(7) Turn the SEL/PUSH EXEC dial to select CONTROL, then press the dial.
(8) Turn the SEL/PUSH EXEC dial to select i.LINK, then press tile dial.
80